Product usage:

Can be used for a variety of soft materials and adhesive materials of the sheet half or full cut (adhesive: on one side of the material with double-sided adhesive), such as: silicone rubber board, double-sided adhesive, EVA, sponge, non-woven cloth, copper/aluminum foil, thermal conductivity silica gel, fast bar paper/green bare paper and other materials cutting and mounting die cutting.

Product features:

1. Imported PLC and touch screen, Chinese font, simple and easy to understand.

2, flat push material mode, the use of advanced imported screw + guide rail, cutting accuracy has the most basic guarantee.

3, important parts made of cast iron, through high temperature annealing, permanent deformation, for the operation of the knife stability escort

4, the cutting speed can be adjusted, according to the material thickness, viscosity to adjust the cutting speed

5. System operation can control feeding or cutting knife independently, such as: micro-moving feeding, micro-moving resetting, single cutting, etc

6. The device has counting function and emergency stop function, and the cutting knife has safety protection cover

7. The centralized oil supply ensures the normal lubrication of the equipment.

Technical indicators:

1. Half cut and full cut can be automatically exchanged (e.g. 5 half cut and 1 full cut).

2. Multi-size cutting (for example: size 1:5 knives for 10mm quantity, size 2:2 knives for 20mm quantity, up to 12 groups can be set.

3. The thickness of the bottom paper shall not be less than 0.06mm

4. Speed up to 130 cycles /mid (cutting size below 30mm)